Configure Device
The following are important steps you should take before transmitting any messages. Make sure that you have flashed your device with Meshtastic and connected with a client before proceeding.
Set Region
important
Make sure to set your region to the correct region so you don't transmit on an incorrect frequency.
The region variable sets which region your radio is configured to work in. It is important to ensure that you've set it to the correct region. If left Unset, it will default to US settings.
| Name | Center Frequency | Spacing | Number of Channels | Power Limit |
|---|---|---|---|---|
| US | 903.08 | 2.16 | 13 | 0 |
| EU433 | 433.175 | 0.2 | 8 | 0 |
| EU868 | 865.2 | 0.3 | 10 | 0 |
| CN | 470.0 | 2.0 | 20 | 0 |
| JP | 920.0 | 0.5 | 10 | 13 |
| ANZ | 916.0 | 0.5 | 20 | 0 |
| KR | 921.9 | 0.2 | 8 | 0 |
| TW | 923.0 | 0.2 | 10 | 0 |
| RU | 868.9 | 0.2 | 2 | 20 |
| Unset | 903.08 | 2.16 | 13 | 0 |
note
For more details about region settings, you can see the source code here
| Setting | Acceptable Values | Default |
|---|---|---|
| region | Unset, US, EU433, EU865, CN, JP, ANZ, KR, TW, RU | Unset |
- CLI
- Android
- iOS
- Web
meshtastic --set region Unset
meshtastic --set region US
info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.
info
Configuring this setting is not yet available for the selected platform. If this is incorrect please update the documentation for this page.